Radiographic Testing (RT) Training & Certification
Industry-focused RT training designed to prepare you for certification and real-world inspection challenges.
Our comprehensive Radiographic Testing program equips you with the technical knowledge and practical skills needed to inspect welds, castings, pressure vessels, and structural components while adhering to international NDT standards and safety practices.
Radiographic Testing: Level 1 (Welds, Castings)
| Duration | Type | Technique |
|---|---|---|
| Training: 5 days (35 Hours) | Theory & Practical | Light / Dense (metal) |
| Examination: 1 – 2 days | Theory & Practical | Light / Dense (metal) |
The course includes instructor-led training, practical sessions, and structured self-study/homework assignments designed to meet the minimum training hours specified by BINDT.
Note: All students that wish to perform radiography require a valid Basic Radiation Safety (BRS) training for 2 days; this can be included as part of any RT course.
Why Attend This Course?
The PCN Radiographic Testing (RT) Level 1 course combines comprehensive theoretical knowledge with practical training in Radiographic Testing. This PCN Recognised course meets the training requirements specified by the PCN Scheme and provides excellent preparation for the PCN RT Level 1 certification examination. The course is also suitable for employer-based certification schemes such as SNT-TC-1A, EN 4179 and NAS 410.
Course Content
- Basic radiation safety
- Properties of X-rays and gamma rays
- Atomic structure
- Generation of X-rays
- Natural and artificial gamma radiation sources
- Gamma ray equipment
- Radiographic film and image quality
- Intensifying screens, exposure charts and exposure calculations
- Radiographic techniques for welds and castings
- Darkroom procedures
- Radiographic quality and image evaluation
- Application of written instructions and radiographic techniques
- Relevant codes, standards, specifications and procedures
- Practical exercises
Learning Outcomes
Upon successful completion of this course, participants will be able to:
- Set up and operate Radiographic Testing equipment.
- Perform Radiographic Testing in accordance with written instructions.
- Produce quality radiographs using appropriate techniques.
- Record and classify inspection results in accordance with specified acceptance criteria.
- Prepare inspection reports.
- Perform inspections under the supervision of PCN Level 2 or Level 3 personnel.
Radiographic Testing: Level 2 (Welds, Castings)
| Duration | Type | Technique |
|---|---|---|
| Training: 7 days (70 Hours) | Theory & Practical | Light / Dense (metal) |
| Examination: 1 – 2 days | Theory & Practical | Light / Dense (metal) |
Minimum Industrial Experience: 135 days
Direct Level 2 (Welds, Castings)
| Duration | Type | Technique |
|---|---|---|
| Training: 11 days (105 Hours) | Theory & Practical | Light / Dense (metal) |
| Examination: 1 – 2 days | Theory & Practical | Light / Dense (metal) |
Minimum Industrial Experience: 180 days
The course includes instructor-led training, practical sessions, and structured self-study/homework assignments designed to meet the minimum training hours specified by BINDT.
Note: All students that wish to perform radiography require a valid Basic Radiation Safety (BRS) training for 2 days; this can be included as part of any RT course.
Why Attend This Course?
The PCN Radiographic Testing (RT) Level 2 course combines Radiographic Testing theory, practical training and radiograph interpretation to develop the knowledge and practical skills required for Level 2 certification. This PCN Recognised course meets the training requirements specified by the PCN Scheme and provides excellent preparation for the PCN RT Level 2 certification examination. The course is also suitable for employer-based certification schemes such as SNT-TC-1A, EN 4179 and NAS 410.
Course Content
- Basic radiation safety
- Properties of X-rays and gamma rays
- Atomic structure
- Generation of X-rays
- Natural and artificial gamma radiation sources
- Gamma ray equipment
- Radiographic film and image quality
- Intensifying screens, exposure charts and exposure calculations
- Radiographic techniques for welds and castings
- Darkroom procedures
- Radiographic quality
- Interpretation and evaluation of radiographs
- Preparation of written radiographic instructions and techniques
- Relevant codes, standards, specifications and procedures
- Practical exercises
Learning Outcomes
Upon successful completion of this course, participants will be able to:
- Select appropriate Radiographic Testing techniques.
- Set up, calibrate and verify Radiographic Testing equipment.
- Perform and supervise Radiographic Testing inspections.
- Interpret and evaluate radiographic images in accordance with applicable codes, standards and procedures.
- Prepare written Radiographic Testing instructions and inspection reports.
- Provide technical guidance to Level 1 personnel.
- Perform inspection activities within the scope of PCN RT Level 2 certification.
Note: PCN RT Level 2 personnel are responsible for selecting appropriate inspection techniques, interpreting inspection results and supervising Level 1 personnel within the scope of their certification.
Radiographic Testing – Level 3 (Welds, Castings)
| Duration | Type | Technique |
|---|---|---|
| Training: 5 days (35 Hours) | Theory & Drafting RT Procedure | Light / Dense (metal) |
| Examination: 1 day | Theory & Drafting RT Procedure | Light / Dense (metal) |
The course includes instructor-led training, and structured self-study/homework assignments designed to meet the minimum training hours specified by BINDT.
Note:
- Additional 12 days training for Basic
Minimum Industrial Experience:
| Duration | Type |
|---|---|
| Higher education* with Level 2 (*recognized by BINDT is restricted to a recognised degree in non-destructive testing) | 270 days |
| with Level 2 | 450 days |
| Direct access with higher education* (*recognized by BINDT is restricted to a recognised degree in non-destructive testing) | 540 days |
Why Attend This Course?
The PCN Radiographic Testing (RT) Level 3 course combines advanced Radiographic Testing theory, specific application training and procedure writing to develop the technical knowledge and leadership skills required for Level 3 certification. This PCN Recognised course meets the training requirements specified by the PCN Scheme and provides excellent preparation for the PCN RT Level 3 certification examination. The course is also suitable for employer-based certification schemes such as SNT-TC-1A, EN 4179 and NAS 410.
Course Content
- Advanced radiation physics
- Properties of X-rays and gamma rays
- Atomic structure
- Generation of X-rays
- Natural and artificial gamma radiation sources
- Gamma ray equipment
- Radiographic film and image quality
- Intensifying screens, exposure charts and exposure calculations
- Radiographic techniques for welds and castings
- Darkroom procedures
- Interpretation and evaluation of radiographs
- Computed and digital radiography (CR & DR)
- Relevant codes, standards, specifications and procedures
- Procedure preparation and review
Learning Outcomes
Upon successful completion of this course, participants will be able to:
- Select appropriate Radiographic Testing methods and techniques.
- Develop, review and validate Radiographic Testing procedures.
- Interpret applicable codes, standards and specifications.
- Evaluate and interpret radiographic inspection results.
- Provide technical guidance and supervision to NDT personnel.
- Manage Radiographic Testing activities in accordance with applicable quality requirements.
- Be well prepared for the PCN RT Level 3 certification examination.
Note: PCN RT Level 3 personnel are responsible for establishing inspection techniques and procedures, interpreting inspection results, providing technical guidance, and supervising NDT personnel within the scope of their certification.
Radiographic Testing – Recertification (Level 1, 2 & 3)
| Duration | Type | Technique |
|---|---|---|
| Examination: 1 or 2 days | Theory & Practical / only Practical | Light / Dense (metal) |
Radiographic Film Interpretation – (Level 2-Welds, Castings)
| Duration | Type | Technique |
|---|---|---|
| Training: 7 days (56 hours) | Theory & Practical | Light / Dense (metal) |
| Examination: 1 day | Theory & Practical | Light / Dense (metal) |
Minimum Industrial Experience: 90 days
Why Attend This Course?
The Radiographic Interpretation course provides comprehensive training in the interpretation and evaluation of radiographic images for welds and castings. Designed for personnel requiring advanced radiographic interpretation skills, the course provides excellent preparation for PCN and ASNT Radiographic Interpreter examinations.
Course Content
- Properties and production of X-rays and gamma rays
- Formation of the latent image
- Radiographic film and image quality
- Radiographic techniques
- Identification of weld and casting types
- Identification and evaluation of discontinuities
- Assessment and measurement of radiographic quality
- Interpretation of radiographs
- Acceptance criteria and sentencing to specifications
- Weld technology
- Relevant codes, standards and specifications
Learning Outcomes
Upon successful completion of this course, participants will be able to:
- Interpret radiographic images of welds and castings.
- Identify and evaluate common discontinuities.
- Assess radiographic image quality.
- Apply acceptance criteria in accordance with applicable specifications.
- Prepare radiographic interpretation reports.
- Be well prepared for PCN and ASNT Radiographic Interpreter examinations.
| Duration | Type | Technique |
|---|---|---|
| Examination: 1 day | Practical | Light / Dense (metal) |
Ready to Become a Certified RT Professional?
Gain the knowledge and practical skills required for a successful career in Radiographic Testing. Fill out the form below to receive course details, batch schedules, certification information, and fee structure.