Become a Certified Magnetic Particle Testing Professional
Develop the practical skills to detect surface and near-surface defects in ferromagnetic materials through expert-led, hands-on training.
Develop the skills to perform reliable magnetic particle inspections on welds, castings, forgings, and other ferromagnetic components.
Magnetic Particle: Level 1 (Welds / Multi Sector)
| Duration | Type | Technique |
|---|---|---|
| Training: 3 days (21 Hours) | Theory & Practical | Visible / Fluorescent |
| Examination: 1 day | Theory & Practical | Visible / Fluorescent |
The course includes instructor-led training, practical sessions, and structured self-study/homework assignments designed to meet the minimum training hours specified by BINDT.
Minimum Industrial Experience: 15 days
Why Attend This Course?
The PCN Magnetic Particle Testing (MT) Level 1 course combines comprehensive theoretical knowledge with practical training in Magnetic Particle Testing. Suitable for both beginners and personnel with existing NDT knowledge, this PCN Recognised course meets the training requirements specified by the PCN Scheme and provides excellent preparation for the PCN MT Level 1 certification examination.
Course Content
- Introduction to Magnetic Particle Testing
- Basic principles of magnetism and Magnetic Particle Testing
- Product technology and applications
- Magnetic Particle Testing equipment
- Relevant codes, standards and specifications
- Pre-inspection requirements
- Magnetic Particle Testing techniques and procedures
- Post-inspection activities
- Classification and evaluation of indications
- Inspection reporting
- Personnel qualification requirements
- Health and safety
Learning Outcomes
Upon successful completion of this course, participants will be able to:
- Set up and operate Magnetic Particle Testing equipment.
- Perform Magnetic Particle Testing inspections in accordance with written instructions.
- Detect, record and classify surface and near-surface discontinuities.
- Prepare inspection reports.
- Perform inspections under the supervision of PCN Level 2 or Level 3 personnel.
Note: PCN MT Level 1 personnel are not responsible for selecting the inspection method or technique or interpreting inspection results.
Magnetic Particle: Level 2 with Level 1 (Welds / Multi Sector)
| Duration | Type | Technique |
|---|---|---|
| Training: 2 days (14 Hours) | Theory & Practical | Visible / Fluorescent |
| Examination: 1 day | Theory & Practical | Visible / Fluorescent |
Magnetic Particle: Direct Level 2 (Welds / Multi Sector)
| Duration | Type | Technique |
|---|---|---|
| Training: 5 days (35 Hours) | Theory & Practical | Visible / Fluorescent |
| Examination: 1 day | Theory & Practical | Visible / Fluorescent |
Minimum Industrial Experience: 45 days
The course includes instructor-led training, practical sessions, and structured self-study/homework assignments designed to meet the minimum training hours specified by BINDT.
Why Attend This Course?
The PCN Magnetic Particle Testing (MT) Level 2 course combines comprehensive theoretical knowledge with extensive practical training on welds, castings and wrought products. Suitable for personnel with existing NDT knowledge, this PCN Recognised course meets the training requirements specified by the PCN Schemeand provides excellent preparation for the PCN MT Level 2 certification examination.
Course Content
- Principles of magnetism and magnetic fields
- Principles of Magnetic Particle Testing
- Magnetic Particle Testing equipment
- Equipment calibration and verification
- Identification of materials
- Magnetic Particle Testing techniques and procedures
- Detection, interpretation and evaluation of indications
- Inspection reporting
- Relevant codes, standards and specifications
- PCN documentation
- Product technology
- Extensive practical training
Learning Outcomes
Upon successful completion of this course, participants will be able to:
- Select appropriate Magnetic Particle Testing techniques.
- Set up, calibrate and verify Magnetic Particle Testing equipment.
- Perform and supervise Magnetic Particle Testing inspections.
- Interpret and evaluate inspection results in accordance with applicable codes, standards and procedures.
- Prepare written Magnetic Particle Testing instructions and inspection reports.
- Provide technical guidance to Level 1 personnel.
- Perform inspection activities within the scope of PCN MT Level 2 certification.
Note: PCN MT Level 2 personnel are responsible for selecting appropriate inspection techniques, interpreting inspection results and supervising Level 1 personnel within the scope of their certification.
Magnetic Particle Testing – Level 3 (Welds, Multi Sector)
| Duration | Type | Technique |
|---|---|---|
| Training: 4 days (28 Hours) | Theory & Drafting MT Procedure | Visible / Fluorescent |
| Examination: 1 day | Theory & Drafting MT Procedure | Visible / Fluorescent |
The course includes instructor-led training, practical sessions, and structured self-study/homework assignments designed to meet the minimum training hours specified by BINDT.
Note:
- Additional 12 days training for Basic
Minimum Industrial Experience:
| Duration | Type |
|---|---|
| Higher education* with Level 2 (*recognized by BINDT is restricted to a recognised degree in non-destructive testing) | 180 days |
| with Level 2 | 240 days |
| Direct access with higher education* (*recognized by BINDT is restricted to a recognised degree in non-destructive testing) | 360 days |
Why Attend This Course?
The PCN Magnetic Particle Testing (MT) Level 3 course is designed for experienced NDT professionals seeking to develop the advanced technical knowledge and leadership skills required for Level 3 certification. This guidance course meets the requirements of the PCN Scheme and provides excellent preparation for the PCN MT Level 3 certification examination.
Prerequisite: Candidates must successfully complete the PCN Level 3 Basic Training Course before attending the MT Level 3 Main Method course.
Course Content
- Introduction to Magnetic Particle Testing
- Advanced principles of magnetism
- Typical discontinuities and defect characteristics
- Testing parameters and inspection techniques
- Magnetic Particle Testing equipment
- Relevant codes, standards and specifications
- Material identification and product technology
- Magnetic Particle Testing procedures
- Post-inspection activities
- Inspection reporting
- Personnel qualification requirements
- Health and safety
- Procedure preparation and review
Learning Outcomes
Upon successful completion of this course, participants will be able to:
- Select appropriate Magnetic Particle Testing methods and techniques.
- Develop, review and validate Magnetic Particle Testing procedures.
- Interpret applicable codes, standards and specifications.
- Evaluate and interpret inspection results.
- Provide technical guidance and supervision to NDT personnel.
- Manage Magnetic Particle Testing activities in accordance with applicable quality requirements.
- Be well prepared for the PCN MT Level 3 certification examination.
Note: PCN MT Level 3 personnel are responsible for establishing inspection techniques and procedures, interpreting inspection results, providing technical guidance, and supervising NDT personnel within the scope of their certification.
Magnetic particle Testing – Recertification (Level 1, 2, 3)
| Duration | Type | Technique |
|---|---|---|
| Examination: 1 day | Theory & Practical / only Practical | Visible / Fluorescent |
Start Your Magnetic Particle Testing Training Journey
Gain the practical skills and technical knowledge needed to perform reliable Magnetic Particle Testing inspections. Complete the form below to receive course details, upcoming batch schedules, certification guidance, and fee information. Our training advisors will help you choose the right program for your career goals.